What Are Glycol Chiller Systems?

Glycol chiller systems are widely used across UK industries where precise temperature control is required. From breweries and dairies to laboratories and manufacturing plants, these systems provide consistent cooling performance using a solution of glycol blended with water to transfer heat.

Unlike standard water chillers, glycol chillers use a glycol-based solution that lowers the freezing point of the circulating fluid. This makes them suitable for processes requiring sub-zero temperatures and environments subject to low ambient conditions.

At a fundamental level, glycol chiller systems extract unwanted heat via a closed refrigeration cycle. The cooled glycol solution is then circulated to the load, where it collects process heat and returns to repeat the cycle.

How a Glycol Chiller System Works

A well-considered glycol chiller system design supports efficiency and stable operation. Core components typically include:

• Refrigeration compressor


• Heat rejection condenser


• Evaporator


• Metering device


• Integrated buffer tank and circulation pump


• Control panel

Within the evaporator, the refrigeration cycle extracts thermal energy from the secondary fluid. The chilled solution is then sent to the process load, absorbs heat, and flows back to the unit.

A typical glycol chiller system diagram shows two distinct circuits. The refrigeration loop manages heat removal, while the glycol loop transfers chilled fluid to the point of use. Accurate schematics are valuable for commissioning and diagnostics.

Glycol Chiller System Control Panel

The glycol chiller system control panel acts as the central interface for monitoring and adjustment. Modern panels typically include:

• Digital temperature controllers


• Integrated logic controllers


• High and low pressure safety switches


• Circulation pump management


• Alarm notifications


• BMS or remote access integration

The control panel manages compressor cycling, supervises operating conditions and ensures safety limits are maintained. Many systems also log performance data to support preventative maintenance and compliance documentation.

In facilities requiring precise cooling, reliable control minimises fluctuations that might compromise process stability.

Control Panel Installation Considerations

Proper glycol chiller system control panel installation is essential for consistent performance and regulatory compliance. Key factors include:

• Electrical compliance – The panel should be installed in accordance with UK standards, with correct breaker sizing and safe isolation points.


• Environmental positioning – Installation should avoid damp conditions and excessive ambient temperatures.


• Commissioning procedures – Post-installation checks must include sensor accuracy, alarm testing and pump sequencing confirmation.

Commissioning ensures the unit operates in line with the original glycol chiller system design specifications.

Key Factors in System Design

Effective glycol chiller system design begins with accurate assessment of the cooling load. Engineers evaluate:

• Target operating temperatures


• Hydraulic design and circulation requirements


• Ambient environmental conditions


• Redundancy or backup requirements


• Allowance for capacity growth

Correct sizing is essential to avoid inefficiency or inadequate cooling. Load calculations must consider peak demand and operational cycles.

Fluid selection also plays a role. Propylene glycol is commonly used in food and beverage settings due to its lower toxicity, whereas ethylene glycol can be chosen for applications prioritising thermal performance.

Additional considerations such as pipe insulation, pump specification and heat exchanger configuration influence stability, efficiency and lifespan.

Where Glycol Cooling Is Used

Glycol chiller systems support numerous sectors across the UK, including:

• Beer and spirit production


• Dairy and food processing facilities


• Medical and laboratory facilities


• Precision equipment temperature control


• Plastics processing and injection moulding


• Cold storage and preparation areas

For example, in beverage production, chillers regulate process temperatures and stabilise product storage. In manufacturing settings, they protect equipment from excessive thermal build-up.

Maintenance and Long-Term Reliability

Routine maintenance supports efficient operation and reduced downtime. Typical servicing tasks include:

• Testing fluid concentration and condition


• Assessing circulation components


• Cleaning condenser coils


• Verifying control panel settings


• Monitoring refrigerant pressures

Over time, glycol can lose effectiveness through dilution or contamination, reducing heat transfer efficiency. Regular testing helps maintain optimal performance.

When correctly designed, installed and maintained, glycol chiller systems can provide reliable service for many years.

Common Queries About Glycol Chiller Systems

What is the typical glycol percentage?

Most UK systems operate with a concentration between 20% and 40%.

Can a glycol chiller be installed outdoors?

Yes, provided the unit is rated for outdoor use and protected against environmental exposure.

How does a glycol chiller differ from a water chiller?

Unlike water-only systems, glycol-based chillers resist freezing and support sub-zero applications.

Is remote access available?

Advanced control panels often provide remote monitoring and data logging functionality.

What is the recommended testing frequency?

Fluid condition should be reviewed regularly based on system workload.

Where are they most commonly used?

Industries requiring stable and low-temperature control frequently depend on glycol-based systems.

Final Considerations

Glycol chiller systems deliver dependable cooling performance across a broad range of industrial and commercial applications. From accurate load calculation and correct commissioning through to routine servicing, every stage affects efficiency and longevity.

Whether planning a new installation or upgrading existing equipment, engaging knowledgeable engineers helps align system capacity with process needs. For technical advice and tailored solutions, consult the Newsome glycol chillers page to explore engineered glycol cooling solutions designed for long-term performance.